| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
0478dac6 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.
The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
| #
15347d2d |
|
22-Jun-2021 |
Stephen Carlson <stcarlso@linux.microsoft.com> |
board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|