#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ab61cc7d |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: congatec: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Acked-by: Oliver Graute <oliver.graute@kococonnector.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ab61cc7d |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: congatec: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Acked-by: Oliver Graute <oliver.graute@kococonnector.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ab61cc7d |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: congatec: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Acked-by: Oliver Graute <oliver.graute@kococonnector.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ab61cc7d |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: congatec: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Acked-by: Oliver Graute <oliver.graute@kococonnector.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ab61cc7d |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: congatec: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Acked-by: Oliver Graute <oliver.graute@kococonnector.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ab61cc7d |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: congatec: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Acked-by: Oliver Graute <oliver.graute@kococonnector.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ab61cc7d |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: congatec: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Acked-by: Oliver Graute <oliver.graute@kococonnector.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ab61cc7d |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: congatec: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Acked-by: Oliver Graute <oliver.graute@kococonnector.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ab61cc7d |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: congatec: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Acked-by: Oliver Graute <oliver.graute@kococonnector.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ab61cc7d |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: congatec: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Acked-by: Oliver Graute <oliver.graute@kococonnector.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ab61cc7d |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: congatec: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Acked-by: Oliver Graute <oliver.graute@kococonnector.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
ab61cc7d |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: congatec: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Acked-by: Oliver Graute <oliver.graute@kococonnector.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
ab61cc7d |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: congatec: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Acked-by: Oliver Graute <oliver.graute@kococonnector.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
ab61cc7d |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: congatec: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Acked-by: Oliver Graute <oliver.graute@kococonnector.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
ab61cc7d |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: congatec: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Acked-by: Oliver Graute <oliver.graute@kococonnector.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
81f3a665 |
|
16-Apr-2024 |
Michal Simek <michal.simek@amd.com> |
common: Convert *.c/h from UTF-8 to ASCII enconfing Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
f8b874f5 |
|
26-Mar-2024 |
Fabio Estevam <festevam@denx.de> |
imx8: Add a default reset_cpu() implementation Add a weak default reset_cpu() implementation just like it is done on arch/arm/mach-imx/cpu.c. This allows the removal of the empty reset_cpu() in several board files. Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
c186596a |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
99ac6c76 |
|
27-Apr-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: move imx8 sci header file to include/firmware/imx Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
558e699d |
|
19-Jul-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
arm: use the correct prototype for reset_cpu function Align reset_cpu function with the next prototypes in sysreset.h or in cpu_func.h to solve compilation issue: void reset_cpu(void); This patch solves the prototype conflict when cpu_func.h is included. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|
#
fe133eb1 |
|
31-May-2021 |
Oliver Graute <oliver.graute@kococonnector.com> |
imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
|