Merge patch series "board: beagle: Enable 32k and debounce configuration and fixups"

Nishanth Menon <nm@ti.com> says:

Hi,

Rev 2 of the series.

This is a follow up from [1] - Without the 32k crystal configuration,
wlan doesn't work. Debounce is needed for HDMI Hot plug detect(hpd)
gpio interrupt not storming.

At least the 32k configuration has been done for toradex and phytec
boards, follow similar model of programming.

Series is now based off master branch.

Bootlog: https://gist.github.com/nmenon/75df38bee907785d1d78d1ec4abd7304

Changes from V2:
- Removed depedency on [2] - depending on which way
the merge sequence goes, one of the series will need a rebase.
- Added a patch for a bug that Jan noticed
- Fixup for the fat finger missing 0x in 0x4080 :(

[1] https://lore.kernel.org/u-boot/20230725185253.2123433-4-nm@ti.com/
[2] https://lore.kernel.org/u-boot/20240212194726.1093771-1-nm@ti.com/

board: beagle: beagleplay: env: Drop usb and pxe as boot targets

We had enabled USB and network pxe boot with the hope to get it all
merged on time. However, it has not panned out. Drop usb and pxe boot
else bootflow scan -l throws in:
a) Unknown uclass 'usb' in label
b) Crashes when attempting pxe - cpsw/mdio driver apparently has missing
error handling of what ever form. This is the one that Jan noticed in
his log.

We can enable these on a later date once things are working.

Cc: Roger Quadros <rogerq@kernel.org>

Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Closes: https://lore.kernel.org/all/782ea2c0-eef5-478d-a122-cc6e2d066762@siemens.com/
Signed-off-by: Nishanth Menon <nm@ti.com>

board: beagle: beagleplay: Set fdtfile from C code instead of findfdt script

Stop using the findfdt script and switch to setting the fdtfile from C
code.

Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>

board: Move beagleplay under beagle vendor folder

Move beagleplay support away from ti/am62x to it's own beagle vendor
folder.

This forms the starting point for new beagle platforms added under it's
own board vendor folder.

As part of this create all the associated files with a bare minimum
beagleplay.c file.

Suggested-by: Andrew Davis <afd@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
[trini: Update k3-binman.dtsi to use full path to scheme.yaml now]
Signed-off-by: Tom Rini <trini@konsulko.com>

board: beagle: beagleplay: Set fdtfile from C code instead of findfdt script

Stop using the findfdt script and switch to setting the fdtfile from C
code.

Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>

board: Move beagleplay under beagle vendor folder

Move beagleplay support away from ti/am62x to it's own beagle vendor
folder.

This forms the starting point for new beagle platforms added under it's
own board vendor folder.

As part of this create all the associated files with a bare minimum
beagleplay.c file.

Suggested-by: Andrew Davis <afd@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
[trini: Update k3-binman.dtsi to use full path to scheme.yaml now]
Signed-off-by: Tom Rini <trini@konsulko.com>

board: Move beagleplay under beagle vendor folder

Move beagleplay support away from ti/am62x to it's own beagle vendor
folder.

This forms the starting point for new beagle platforms added under it's
own board vendor folder.

As part of this create all the associated files with a bare minimum
beagleplay.c file.

Suggested-by: Andrew Davis <afd@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
[trini: Update k3-binman.dtsi to use full path to scheme.yaml now]
Signed-off-by: Tom Rini <trini@konsulko.com>