#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
27f41aa5 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: amlogic: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
27f41aa5 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: amlogic: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
27f41aa5 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: amlogic: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
27f41aa5 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: amlogic: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
27f41aa5 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: amlogic: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
27f41aa5 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: amlogic: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
27f41aa5 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: amlogic: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
27f41aa5 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: amlogic: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
27f41aa5 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: amlogic: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
27f41aa5 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: amlogic: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
27f41aa5 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: amlogic: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
27f41aa5 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: amlogic: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
27f41aa5 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: amlogic: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
27f41aa5 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: amlogic: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
27f41aa5 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: amlogic: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
27f41aa5 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: amlogic: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
27f41aa5 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: amlogic: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
27f41aa5 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: amlogic: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
27f41aa5 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: amlogic: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
27f41aa5 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: amlogic: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
27f41aa5 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: amlogic: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
27f41aa5 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: amlogic: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
27f41aa5 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: amlogic: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
27f41aa5 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: amlogic: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
#
de58694f |
|
10-Feb-2023 |
Neil Armstrong <neil.armstrong@linaro.org> |
ARM: meson: odroid-go-ultra: setup PMIC regulators are board init The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|