#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
ae1b69e8 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: Seagate: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c153576d |
|
03-Feb-2022 |
Tony Dinh <mibodhi@gmail.com> |
arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
cb80ff20 |
|
03-May-2021 |
Tom Rini <trini@konsulko.com> |
bootstage: Eliminate when not enabled When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
52f24238 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop bootstage.h from common header Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9d89bcd8 |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5e6267af |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move reset_phy() to net.h This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
c62db35d |
|
31-May-2017 |
Simon Glass <sjg@chromium.org> |
arm: Add explicit include of <asm/mach-types.h> Rather than relying on common.h to provide this include, which is going away at some point, include it explicitly in each file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
96c5f081 |
|
21-Oct-2014 |
Stefan Roese <sr@denx.de> |
arm: kirkwood: Change naming of dram functions from km_foo() to mvebu_foo() Additionally the SDRAM address decoding register address is not hard coded in the C code any more. A define is introduced for this base address. This makes is possible to use those gpio functions from other MVEBU SoC's as well. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Luka Perkov <luka@openwrt.org> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
|
#
d5c5132f |
|
21-Oct-2014 |
Stefan Roese <sr@denx.de> |
arm: marvell: Extract kirkwood gpio functions into new common file gpio.c This makes is possible to use those gpio functions from other MVEBU SoC's as well. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Luka Perkov <luka@openwrt.org> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
|
#
3dc23f78 |
|
21-Oct-2014 |
Stefan Roese <sr@denx.de> |
arm: marvell: Move arch/kirkwood.h to arch/soc.h This move makes is possible to use this header not only from kirkwood platforms but from all Marvell mvebu platforms. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Luka Perkov <luka@openwrt.org> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
|
#
1a459660 |
|
08-Jul-2013 |
Wolfgang Denk <wd@denx.de> |
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
|
#
9d86f0c3 |
|
26-Nov-2012 |
Albert ARIBAUD <albert.u.boot@aribaud.net> |
kirkwood: make MPP arrays static const This saves stack and code memory for local copy, and consumes initialized data memory. For 22 of the 29 kirkwood-based boards, this results in a global saving of about 30 bytes. For 7 of them, it results in an increase of 6 to 14 bytes. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
|
#
84683638 |
|
31-May-2012 |
Valentin Longchamp <valentin.longchamp@keymile.com> |
kirkwood: fix calls to kirkwood_mpp_conf With the new second save argument introduced by the previous patch, all the calls to the function had to be fixed. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Holger Brunck <holger.brunck@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com>
|
#
c8e66db7 |
|
14-Jan-2012 |
Simon Glass <sjg@chromium.org> |
bootstage: Convert net progress numbers to enums This changes over the network-related progress numbers to use enums from bootstage.h. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
578ac1e9 |
|
10-Dec-2011 |
Simon Glass <sjg@chromium.org> |
bootstage: Make use of BOOTSTAGE_ID_RUN_OS in show_boot_progress() This changes the number 15 as used in boot_stage_progress() to use the new name provided for it. This is a separate patch because it touches so many files. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Mike Frysinger <vapier@gentoo.org>
|
#
36aaa918 |
|
29-Oct-2011 |
Anatolij Gustschin <agust@denx.de> |
ARM: DockStar: fix compilation Fix build problem: mvgbe.c: In function 'mvgbe_initialize': mvgbe.c:735: warning: implicit declaration of function 'get_random_hex' dockstar.c: In function 'board_early_init_f': dockstar.c:43: warning: implicit declaration of function 'kw_config_gpio' dockstar.c: In function 'board_init': dockstar.c:113: warning: implicit declaration of function 'kw_sdram_bar' dockstar.c: In function 'set_leds': dockstar.c:161: warning: implicit declaration of function 'readl' dockstar.c:161: error: dereferencing pointer to incomplete type dockstar.c:162: warning: implicit declaration of function 'writel' dockstar.c:162: error: dereferencing pointer to incomplete type dockstar.c:163: error: dereferencing pointer to incomplete type dockstar.c:164: error: dereferencing pointer to incomplete type make[1]: *** [dockstar.o] Error 1 make: *** [board/Seagate/dockstar/libdockstar.o] Error 2 Reported-by: Roland Kletzing <devzero@web.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Prafulla Wadaskar <prafulla@marvell.com>
|
#
38041db7 |
|
24-Nov-2010 |
Eric Cooper <[ecc@cmu.edu]> |
Seagate FreeAgent DockStar support start with sheevaplug configuration add modifications by Alexander Holler <holler@ahsoftware.de> change RAM definitions to one bank (128 MB) change ident string and prompt define MTD partitions and default environment variables add support for LEDs Signed-off-by: Eric Cooper <ecc@cmu.edu>
|