Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled""

As reported by Jonas Karlman this series breaks booting on some AArch64
platforms with common use cases. For now the best path forward is to
revert the series.

This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing
changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc.

Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/
Signed-off-by: Tom Rini <trini@konsulko.com>

treewide: Make arch-specific bootm code depend on BOOTM

Allow these functions to be compiled in when CONFIG_BOOTM is enabled,
even if CONFIG_CMD_BOOTM is not.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Angelo Dureghello <angelo@kernel-space.org>

WS cleanup: remove SPACE(s) followed by TAB

Signed-off-by: Wolfgang Denk <wd@denx.de>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

xtensa: add support for the xtensa processor architecture [2/2]

The Xtensa processor architecture is a configurable, extensible,
and synthesizable 32-bit RISC processor core provided by Tensilica, inc.

This is the second part of the basic architecture port, adding the
'arch/xtensa' directory and a readme file.

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

treewide: Make arch-specific bootm code depend on BOOTM

Allow these functions to be compiled in when CONFIG_BOOTM is enabled,
even if CONFIG_CMD_BOOTM is not.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Angelo Dureghello <angelo@kernel-space.org>

WS cleanup: remove SPACE(s) followed by TAB

Signed-off-by: Wolfgang Denk <wd@denx.de>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

xtensa: add support for the xtensa processor architecture [2/2]

The Xtensa processor architecture is a configurable, extensible,
and synthesizable 32-bit RISC processor core provided by Tensilica, inc.

This is the second part of the basic architecture port, adding the
'arch/xtensa' directory and a readme file.

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

WS cleanup: remove SPACE(s) followed by TAB

Signed-off-by: Wolfgang Denk <wd@denx.de>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

xtensa: add support for the xtensa processor architecture [2/2]

The Xtensa processor architecture is a configurable, extensible,
and synthesizable 32-bit RISC processor core provided by Tensilica, inc.

This is the second part of the basic architecture port, adding the
'arch/xtensa' directory and a readme file.

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>

board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo

Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

xtensa: Remove arch_setup_bdinfo()

arch_setup_bdinfo() only configures the deprecated bi_memstart &
bi_memsize values, which should not be needed any more. Lets remove
this file completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>