common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case

According to De Morgan's Law[1]:
!(A && B) = !A || !B
!(A || B) = !A && !B

There are 5 places in the code where we find:
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE on?"
and the construct:
defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
"is the [DI]CACHE off?"

Therefore
!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
"the opposite of 'are they both off?'"
in other words:
"are either or both on?"
and:
(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>