#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
e51478ba |
|
27-Apr-2024 |
Tom Rini <trini@konsulko.com> |
x86: Remove <common.h> and add needed includes Remove <common.h> from all x86 architecture files and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
cafe8712 |
|
30-Jul-2022 |
Simon Glass <sjg@chromium.org> |
video: Renname vbe.h to vesa.h We want to use VBE to mean Verfiied Boot for Embedded in U-Boot. Rename the existing VBE (Vesa BIOS extensions) to allow this. Verified Boot for Embedded is documented doc/develop/vbe.rst Signed-off-by: Simon Glass <sjg@chromium.org> |
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
ef5f5f6c |
|
09-Jul-2020 |
Simon Glass <sjg@chromium.org> |
x86: Avoid #ifdef with CONFIG_HAVE_ACPI_RESUME At present this enables a few arch-specific members of the global_data struct which are otherwise not part of the struct. As a result we have to use #ifdef in various places. The cost of always having these in the struct is small. Adjust things so that we can use compile-time code instead of #ifdefs. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
3cabcf96 |
|
08-Apr-2020 |
Simon Glass <sjg@chromium.org> |
x86: Move acpi_s3.h to include/acpi/ This header relates to ACPI and we are about to add some more ACPI headers. Move this one into a new directory so they are together. The header inclusion in pci_rom.c is not specific to x86 anymore, so drop the #ifdef CONFIG_X86. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |
#
336d4615 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Create a new header file for 'compat' features At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
49a0f8cc |
|
25-Sep-2019 |
Simon Glass <sjg@chromium.org> |
x86: Move acpi_s3.h to a common location At present this hedaer is only available on x86. To allow sandbox to use it for testing, move it to a common location. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
45519924 |
|
11-Apr-2018 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Rename e820entry to e820_entry This changes 'struct e820entry' to 'struct e820_entry' to conform with the coding style. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> |
#
95e50dd1 |
|
21-Apr-2017 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Do not clear high table area for S3 When SeaBIOS is being used, U-Boot reserves a memory area to be used for configuration tables like ACPI. But it should not be cleared otherwise ACPI table will be missing. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stefan Roese <sr@denx.de> |
#
789b6dce |
|
11-May-2016 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Prepare configuration tables in dedicated high memory region Currently when CONFIG_SEABIOS is on, U-Boot allocates configuration tables via normal malloc(). To simplify, use a dedicated memory region which is reserved on the stack before relocation for this purpose. Add functions for reserve and malloc. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
26f9a9b7 |
|
27-Feb-2016 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Implement functions for writing coreboot table To prepare generating coreboot table from U-Boot, implement functions to handle the writing. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
e51478ba |
|
27-Apr-2024 |
Tom Rini <trini@konsulko.com> |
x86: Remove <common.h> and add needed includes Remove <common.h> from all x86 architecture files and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
cafe8712 |
|
30-Jul-2022 |
Simon Glass <sjg@chromium.org> |
video: Renname vbe.h to vesa.h We want to use VBE to mean Verfiied Boot for Embedded in U-Boot. Rename the existing VBE (Vesa BIOS extensions) to allow this. Verified Boot for Embedded is documented doc/develop/vbe.rst Signed-off-by: Simon Glass <sjg@chromium.org> |
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
ef5f5f6c |
|
09-Jul-2020 |
Simon Glass <sjg@chromium.org> |
x86: Avoid #ifdef with CONFIG_HAVE_ACPI_RESUME At present this enables a few arch-specific members of the global_data struct which are otherwise not part of the struct. As a result we have to use #ifdef in various places. The cost of always having these in the struct is small. Adjust things so that we can use compile-time code instead of #ifdefs. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
3cabcf96 |
|
08-Apr-2020 |
Simon Glass <sjg@chromium.org> |
x86: Move acpi_s3.h to include/acpi/ This header relates to ACPI and we are about to add some more ACPI headers. Move this one into a new directory so they are together. The header inclusion in pci_rom.c is not specific to x86 anymore, so drop the #ifdef CONFIG_X86. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |
#
336d4615 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Create a new header file for 'compat' features At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
49a0f8cc |
|
25-Sep-2019 |
Simon Glass <sjg@chromium.org> |
x86: Move acpi_s3.h to a common location At present this hedaer is only available on x86. To allow sandbox to use it for testing, move it to a common location. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
45519924 |
|
11-Apr-2018 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Rename e820entry to e820_entry This changes 'struct e820entry' to 'struct e820_entry' to conform with the coding style. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> |
#
95e50dd1 |
|
21-Apr-2017 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Do not clear high table area for S3 When SeaBIOS is being used, U-Boot reserves a memory area to be used for configuration tables like ACPI. But it should not be cleared otherwise ACPI table will be missing. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stefan Roese <sr@denx.de> |
#
789b6dce |
|
11-May-2016 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Prepare configuration tables in dedicated high memory region Currently when CONFIG_SEABIOS is on, U-Boot allocates configuration tables via normal malloc(). To simplify, use a dedicated memory region which is reserved on the stack before relocation for this purpose. Add functions for reserve and malloc. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
26f9a9b7 |
|
27-Feb-2016 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Implement functions for writing coreboot table To prepare generating coreboot table from U-Boot, implement functions to handle the writing. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
cafe8712 |
|
30-Jul-2022 |
Simon Glass <sjg@chromium.org> |
video: Renname vbe.h to vesa.h We want to use VBE to mean Verfiied Boot for Embedded in U-Boot. Rename the existing VBE (Vesa BIOS extensions) to allow this. Verified Boot for Embedded is documented doc/develop/vbe.rst Signed-off-by: Simon Glass <sjg@chromium.org> |
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
ef5f5f6c |
|
09-Jul-2020 |
Simon Glass <sjg@chromium.org> |
x86: Avoid #ifdef with CONFIG_HAVE_ACPI_RESUME At present this enables a few arch-specific members of the global_data struct which are otherwise not part of the struct. As a result we have to use #ifdef in various places. The cost of always having these in the struct is small. Adjust things so that we can use compile-time code instead of #ifdefs. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
3cabcf96 |
|
08-Apr-2020 |
Simon Glass <sjg@chromium.org> |
x86: Move acpi_s3.h to include/acpi/ This header relates to ACPI and we are about to add some more ACPI headers. Move this one into a new directory so they are together. The header inclusion in pci_rom.c is not specific to x86 anymore, so drop the #ifdef CONFIG_X86. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |
#
336d4615 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Create a new header file for 'compat' features At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
49a0f8cc |
|
25-Sep-2019 |
Simon Glass <sjg@chromium.org> |
x86: Move acpi_s3.h to a common location At present this hedaer is only available on x86. To allow sandbox to use it for testing, move it to a common location. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
45519924 |
|
11-Apr-2018 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Rename e820entry to e820_entry This changes 'struct e820entry' to 'struct e820_entry' to conform with the coding style. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> |
#
95e50dd1 |
|
21-Apr-2017 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Do not clear high table area for S3 When SeaBIOS is being used, U-Boot reserves a memory area to be used for configuration tables like ACPI. But it should not be cleared otherwise ACPI table will be missing. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stefan Roese <sr@denx.de> |
#
789b6dce |
|
11-May-2016 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Prepare configuration tables in dedicated high memory region Currently when CONFIG_SEABIOS is on, U-Boot allocates configuration tables via normal malloc(). To simplify, use a dedicated memory region which is reserved on the stack before relocation for this purpose. Add functions for reserve and malloc. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
26f9a9b7 |
|
27-Feb-2016 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Implement functions for writing coreboot table To prepare generating coreboot table from U-Boot, implement functions to handle the writing. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
ef5f5f6c |
|
09-Jul-2020 |
Simon Glass <sjg@chromium.org> |
x86: Avoid #ifdef with CONFIG_HAVE_ACPI_RESUME At present this enables a few arch-specific members of the global_data struct which are otherwise not part of the struct. As a result we have to use #ifdef in various places. The cost of always having these in the struct is small. Adjust things so that we can use compile-time code instead of #ifdefs. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
3cabcf96 |
|
08-Apr-2020 |
Simon Glass <sjg@chromium.org> |
x86: Move acpi_s3.h to include/acpi/ This header relates to ACPI and we are about to add some more ACPI headers. Move this one into a new directory so they are together. The header inclusion in pci_rom.c is not specific to x86 anymore, so drop the #ifdef CONFIG_X86. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |
#
336d4615 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Create a new header file for 'compat' features At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
49a0f8cc |
|
25-Sep-2019 |
Simon Glass <sjg@chromium.org> |
x86: Move acpi_s3.h to a common location At present this hedaer is only available on x86. To allow sandbox to use it for testing, move it to a common location. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
45519924 |
|
11-Apr-2018 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Rename e820entry to e820_entry This changes 'struct e820entry' to 'struct e820_entry' to conform with the coding style. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> |
#
95e50dd1 |
|
21-Apr-2017 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Do not clear high table area for S3 When SeaBIOS is being used, U-Boot reserves a memory area to be used for configuration tables like ACPI. But it should not be cleared otherwise ACPI table will be missing. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stefan Roese <sr@denx.de> |
#
789b6dce |
|
11-May-2016 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Prepare configuration tables in dedicated high memory region Currently when CONFIG_SEABIOS is on, U-Boot allocates configuration tables via normal malloc(). To simplify, use a dedicated memory region which is reserved on the stack before relocation for this purpose. Add functions for reserve and malloc. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
26f9a9b7 |
|
27-Feb-2016 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Implement functions for writing coreboot table To prepare generating coreboot table from U-Boot, implement functions to handle the writing. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
ef5f5f6c |
|
09-Jul-2020 |
Simon Glass <sjg@chromium.org> |
x86: Avoid #ifdef with CONFIG_HAVE_ACPI_RESUME At present this enables a few arch-specific members of the global_data struct which are otherwise not part of the struct. As a result we have to use #ifdef in various places. The cost of always having these in the struct is small. Adjust things so that we can use compile-time code instead of #ifdefs. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
3cabcf96 |
|
08-Apr-2020 |
Simon Glass <sjg@chromium.org> |
x86: Move acpi_s3.h to include/acpi/ This header relates to ACPI and we are about to add some more ACPI headers. Move this one into a new directory so they are together. The header inclusion in pci_rom.c is not specific to x86 anymore, so drop the #ifdef CONFIG_X86. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |
#
336d4615 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Create a new header file for 'compat' features At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
49a0f8cc |
|
25-Sep-2019 |
Simon Glass <sjg@chromium.org> |
x86: Move acpi_s3.h to a common location At present this hedaer is only available on x86. To allow sandbox to use it for testing, move it to a common location. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
45519924 |
|
11-Apr-2018 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Rename e820entry to e820_entry This changes 'struct e820entry' to 'struct e820_entry' to conform with the coding style. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> |
#
95e50dd1 |
|
21-Apr-2017 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Do not clear high table area for S3 When SeaBIOS is being used, U-Boot reserves a memory area to be used for configuration tables like ACPI. But it should not be cleared otherwise ACPI table will be missing. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stefan Roese <sr@denx.de> |
#
789b6dce |
|
11-May-2016 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Prepare configuration tables in dedicated high memory region Currently when CONFIG_SEABIOS is on, U-Boot allocates configuration tables via normal malloc(). To simplify, use a dedicated memory region which is reserved on the stack before relocation for this purpose. Add functions for reserve and malloc. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
26f9a9b7 |
|
27-Feb-2016 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Implement functions for writing coreboot table To prepare generating coreboot table from U-Boot, implement functions to handle the writing. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
3cabcf96 |
|
08-Apr-2020 |
Simon Glass <sjg@chromium.org> |
x86: Move acpi_s3.h to include/acpi/ This header relates to ACPI and we are about to add some more ACPI headers. Move this one into a new directory so they are together. The header inclusion in pci_rom.c is not specific to x86 anymore, so drop the #ifdef CONFIG_X86. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |
#
336d4615 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Create a new header file for 'compat' features At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
49a0f8cc |
|
25-Sep-2019 |
Simon Glass <sjg@chromium.org> |
x86: Move acpi_s3.h to a common location At present this hedaer is only available on x86. To allow sandbox to use it for testing, move it to a common location. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
45519924 |
|
11-Apr-2018 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Rename e820entry to e820_entry This changes 'struct e820entry' to 'struct e820_entry' to conform with the coding style. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> |
#
95e50dd1 |
|
21-Apr-2017 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Do not clear high table area for S3 When SeaBIOS is being used, U-Boot reserves a memory area to be used for configuration tables like ACPI. But it should not be cleared otherwise ACPI table will be missing. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stefan Roese <sr@denx.de> |
#
789b6dce |
|
11-May-2016 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Prepare configuration tables in dedicated high memory region Currently when CONFIG_SEABIOS is on, U-Boot allocates configuration tables via normal malloc(). To simplify, use a dedicated memory region which is reserved on the stack before relocation for this purpose. Add functions for reserve and malloc. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
26f9a9b7 |
|
27-Feb-2016 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Implement functions for writing coreboot table To prepare generating coreboot table from U-Boot, implement functions to handle the writing. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
3cabcf96 |
|
08-Apr-2020 |
Simon Glass <sjg@chromium.org> |
x86: Move acpi_s3.h to include/acpi/ This header relates to ACPI and we are about to add some more ACPI headers. Move this one into a new directory so they are together. The header inclusion in pci_rom.c is not specific to x86 anymore, so drop the #ifdef CONFIG_X86. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |
#
336d4615 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Create a new header file for 'compat' features At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
49a0f8cc |
|
25-Sep-2019 |
Simon Glass <sjg@chromium.org> |
x86: Move acpi_s3.h to a common location At present this hedaer is only available on x86. To allow sandbox to use it for testing, move it to a common location. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
45519924 |
|
11-Apr-2018 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Rename e820entry to e820_entry This changes 'struct e820entry' to 'struct e820_entry' to conform with the coding style. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> |
#
95e50dd1 |
|
21-Apr-2017 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Do not clear high table area for S3 When SeaBIOS is being used, U-Boot reserves a memory area to be used for configuration tables like ACPI. But it should not be cleared otherwise ACPI table will be missing. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stefan Roese <sr@denx.de> |
#
789b6dce |
|
11-May-2016 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Prepare configuration tables in dedicated high memory region Currently when CONFIG_SEABIOS is on, U-Boot allocates configuration tables via normal malloc(). To simplify, use a dedicated memory region which is reserved on the stack before relocation for this purpose. Add functions for reserve and malloc. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
26f9a9b7 |
|
27-Feb-2016 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Implement functions for writing coreboot table To prepare generating coreboot table from U-Boot, implement functions to handle the writing. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
336d4615 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Create a new header file for 'compat' features At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
49a0f8cc |
|
25-Sep-2019 |
Simon Glass <sjg@chromium.org> |
x86: Move acpi_s3.h to a common location At present this hedaer is only available on x86. To allow sandbox to use it for testing, move it to a common location. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
45519924 |
|
11-Apr-2018 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Rename e820entry to e820_entry This changes 'struct e820entry' to 'struct e820_entry' to conform with the coding style. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> |
#
95e50dd1 |
|
21-Apr-2017 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Do not clear high table area for S3 When SeaBIOS is being used, U-Boot reserves a memory area to be used for configuration tables like ACPI. But it should not be cleared otherwise ACPI table will be missing. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stefan Roese <sr@denx.de> |
#
789b6dce |
|
11-May-2016 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Prepare configuration tables in dedicated high memory region Currently when CONFIG_SEABIOS is on, U-Boot allocates configuration tables via normal malloc(). To simplify, use a dedicated memory region which is reserved on the stack before relocation for this purpose. Add functions for reserve and malloc. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
26f9a9b7 |
|
27-Feb-2016 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Implement functions for writing coreboot table To prepare generating coreboot table from U-Boot, implement functions to handle the writing. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
49a0f8cc |
|
25-Sep-2019 |
Simon Glass <sjg@chromium.org> |
x86: Move acpi_s3.h to a common location At present this hedaer is only available on x86. To allow sandbox to use it for testing, move it to a common location. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
45519924 |
|
11-Apr-2018 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Rename e820entry to e820_entry This changes 'struct e820entry' to 'struct e820_entry' to conform with the coding style. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> |
#
95e50dd1 |
|
21-Apr-2017 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Do not clear high table area for S3 When SeaBIOS is being used, U-Boot reserves a memory area to be used for configuration tables like ACPI. But it should not be cleared otherwise ACPI table will be missing. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stefan Roese <sr@denx.de> |
#
789b6dce |
|
11-May-2016 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Prepare configuration tables in dedicated high memory region Currently when CONFIG_SEABIOS is on, U-Boot allocates configuration tables via normal malloc(). To simplify, use a dedicated memory region which is reserved on the stack before relocation for this purpose. Add functions for reserve and malloc. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
26f9a9b7 |
|
27-Feb-2016 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Implement functions for writing coreboot table To prepare generating coreboot table from U-Boot, implement functions to handle the writing. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
45519924 |
|
11-Apr-2018 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Rename e820entry to e820_entry This changes 'struct e820entry' to 'struct e820_entry' to conform with the coding style. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
|
#
95e50dd1 |
|
21-Apr-2017 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Do not clear high table area for S3 When SeaBIOS is being used, U-Boot reserves a memory area to be used for configuration tables like ACPI. But it should not be cleared otherwise ACPI table will be missing. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stefan Roese <sr@denx.de>
|
#
789b6dce |
|
11-May-2016 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Prepare configuration tables in dedicated high memory region Currently when CONFIG_SEABIOS is on, U-Boot allocates configuration tables via normal malloc(). To simplify, use a dedicated memory region which is reserved on the stack before relocation for this purpose. Add functions for reserve and malloc. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
26f9a9b7 |
|
27-Feb-2016 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Implement functions for writing coreboot table To prepare generating coreboot table from U-Boot, implement functions to handle the writing. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|