arm: dts: introduce am62a7 dtbs from linux kernel

Introduce the basic am62a7 SoC dtbs from the v6.1-rc3 tag of the linux
kernel along with the new am62a specific pinmux definition that we will
use to generate the dtbs for the u-boot-spl and u-boot binaries

Co-developed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>

dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM62

Add pinctrl macros for AM62x SoCs. These macro definitions are similar
to that of previous platforms, but adding new definitions to avoid any
naming confusions in the SoC dts files.

checkpatch insists the following error exists:
ERROR: Macros with complex values should be enclosed in parentheses

However, we do not need parentheses enclosing the values for this
macro as we do intend it to generate two separate values as has been
done for other similar platforms.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721S2

Add pinctrl macros for J721S2 SoC. These macro definitions are
similar to that of J721E, but adding new definitions to avoid
any naming confusions in the soc dts files.

checkpatch insists the following error exists:
ERROR: Macros with complex values should be enclosed in parentheses

However, we do not need parentheses enclosing the values for this
macro as we do intend it to generate two separate values as has been
done for other similar platforms.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>

dt-bindings: pinctrl: k3: Synchronize with v5.14 kernel

Synchronize with the upstream version as of v5.14 kernel tag

Signed-off-by: Nishanth Menon <nm@ti.com>

dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64

Add pinctrl macros for AM64 SoC. These macro definitions are similar to
that of previous platforms, but adding new definitions to avoid any
naming confusions in the soc dts files.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>

dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E

Add pinctrl macros for J721E SoC. These macro definitions are
similar to that of AM6, but adding new definitions to avoid
any naming confusions in the soc dts files.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>

arm: dts: k3-am654: Sync IOPAD macros with Linux

Transition to the IOPAD macros as used in Linux in which the pin mux
mode is specified using a dedicated parameter while also dropping the
related MUX_MODEx macros that are no longer needed. This transition
will allow us to keep both Linux and U-Boot DTS in sync more easily.
While at it also align the file name of the include file itself and
update any references accordingly.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>

dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM62

Add pinctrl macros for AM62x SoCs. These macro definitions are similar
to that of previous platforms, but adding new definitions to avoid any
naming confusions in the SoC dts files.

checkpatch insists the following error exists:
ERROR: Macros with complex values should be enclosed in parentheses

However, we do not need parentheses enclosing the values for this
macro as we do intend it to generate two separate values as has been
done for other similar platforms.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721S2

Add pinctrl macros for J721S2 SoC. These macro definitions are
similar to that of J721E, but adding new definitions to avoid
any naming confusions in the soc dts files.

checkpatch insists the following error exists:
ERROR: Macros with complex values should be enclosed in parentheses

However, we do not need parentheses enclosing the values for this
macro as we do intend it to generate two separate values as has been
done for other similar platforms.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>

dt-bindings: pinctrl: k3: Synchronize with v5.14 kernel

Synchronize with the upstream version as of v5.14 kernel tag

Signed-off-by: Nishanth Menon <nm@ti.com>

dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64

Add pinctrl macros for AM64 SoC. These macro definitions are similar to
that of previous platforms, but adding new definitions to avoid any
naming confusions in the soc dts files.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>

dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E

Add pinctrl macros for J721E SoC. These macro definitions are
similar to that of AM6, but adding new definitions to avoid
any naming confusions in the soc dts files.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>

arm: dts: k3-am654: Sync IOPAD macros with Linux

Transition to the IOPAD macros as used in Linux in which the pin mux
mode is specified using a dedicated parameter while also dropping the
related MUX_MODEx macros that are no longer needed. This transition
will allow us to keep both Linux and U-Boot DTS in sync more easily.
While at it also align the file name of the include file itself and
update any references accordingly.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>

dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721S2

Add pinctrl macros for J721S2 SoC. These macro definitions are
similar to that of J721E, but adding new definitions to avoid
any naming confusions in the soc dts files.

checkpatch insists the following error exists:
ERROR: Macros with complex values should be enclosed in parentheses

However, we do not need parentheses enclosing the values for this
macro as we do intend it to generate two separate values as has been
done for other similar platforms.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>

dt-bindings: pinctrl: k3: Synchronize with v5.14 kernel

Synchronize with the upstream version as of v5.14 kernel tag

Signed-off-by: Nishanth Menon <nm@ti.com>

dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64

Add pinctrl macros for AM64 SoC. These macro definitions are similar to
that of previous platforms, but adding new definitions to avoid any
naming confusions in the soc dts files.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>

dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E

Add pinctrl macros for J721E SoC. These macro definitions are
similar to that of AM6, but adding new definitions to avoid
any naming confusions in the soc dts files.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>

arm: dts: k3-am654: Sync IOPAD macros with Linux

Transition to the IOPAD macros as used in Linux in which the pin mux
mode is specified using a dedicated parameter while also dropping the
related MUX_MODEx macros that are no longer needed. This transition
will allow us to keep both Linux and U-Boot DTS in sync more easily.
While at it also align the file name of the include file itself and
update any references accordingly.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>

dt-bindings: pinctrl: k3: Synchronize with v5.14 kernel

Synchronize with the upstream version as of v5.14 kernel tag

Signed-off-by: Nishanth Menon <nm@ti.com>

dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64

Add pinctrl macros for AM64 SoC. These macro definitions are similar to
that of previous platforms, but adding new definitions to avoid any
naming confusions in the soc dts files.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>

dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E

Add pinctrl macros for J721E SoC. These macro definitions are
similar to that of AM6, but adding new definitions to avoid
any naming confusions in the soc dts files.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>

arm: dts: k3-am654: Sync IOPAD macros with Linux

Transition to the IOPAD macros as used in Linux in which the pin mux
mode is specified using a dedicated parameter while also dropping the
related MUX_MODEx macros that are no longer needed. This transition
will allow us to keep both Linux and U-Boot DTS in sync more easily.
While at it also align the file name of the include file itself and
update any references accordingly.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>

dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64

Add pinctrl macros for AM64 SoC. These macro definitions are similar to
that of previous platforms, but adding new definitions to avoid any
naming confusions in the soc dts files.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>

dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E

Add pinctrl macros for J721E SoC. These macro definitions are
similar to that of AM6, but adding new definitions to avoid
any naming confusions in the soc dts files.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>

arm: dts: k3-am654: Sync IOPAD macros with Linux

Transition to the IOPAD macros as used in Linux in which the pin mux
mode is specified using a dedicated parameter while also dropping the
related MUX_MODEx macros that are no longer needed. This transition
will allow us to keep both Linux and U-Boot DTS in sync more easily.
While at it also align the file name of the include file itself and
update any references accordingly.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>

dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E

Add pinctrl macros for J721E SoC. These macro definitions are
similar to that of AM6, but adding new definitions to avoid
any naming confusions in the soc dts files.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>

arm: dts: k3-am654: Sync IOPAD macros with Linux

Transition to the IOPAD macros as used in Linux in which the pin mux
mode is specified using a dedicated parameter while also dropping the
related MUX_MODEx macros that are no longer needed. This transition
will allow us to keep both Linux and U-Boot DTS in sync more easily.
While at it also align the file name of the include file itself and
update any references accordingly.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>