#
25380291 |
|
03-Nov-2022 |
Bryan Brattlof <bb@ti.com> |
arm: dts: introduce am62a7 dtbs from linux kernel Introduce the basic am62a7 SoC dtbs from the v6.1-rc3 tag of the linux kernel along with the new am62a specific pinmux definition that we will use to generate the dtbs for the u-boot-spl and u-boot binaries Co-developed-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Bryan Brattlof <bb@ti.com> |
#
8a6d2733 |
|
25-May-2022 |
Suman Anna <s-anna@ti.com> |
dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM62 Add pinctrl macros for AM62x SoCs. These macro definitions are similar to that of previous platforms, but adding new definitions to avoid any naming confusions in the SoC dts files. checkpatch insists the following error exists: ERROR: Macros with complex values should be enclosed in parentheses However, we do not need parentheses enclosing the values for this macro as we do intend it to generate two separate values as has been done for other similar platforms. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
#
55e1d747 |
|
25-Jan-2022 |
Aswath Govindraju <a-govindraju@ti.com> |
dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721S2 Add pinctrl macros for J721S2 SoC. These macro definitions are similar to that of J721E, but adding new definitions to avoid any naming confusions in the soc dts files. checkpatch insists the following error exists: ERROR: Macros with complex values should be enclosed in parentheses However, we do not need parentheses enclosing the values for this macro as we do intend it to generate two separate values as has been done for other similar platforms. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> |
#
4698bb8c |
|
31-Aug-2021 |
Nishanth Menon <nm@ti.com> |
dt-bindings: pinctrl: k3: Synchronize with v5.14 kernel Synchronize with the upstream version as of v5.14 kernel tag Signed-off-by: Nishanth Menon <nm@ti.com> |
#
dd418864 |
|
23-Apr-2021 |
Dave Gerlach <d-gerlach@ti.com> |
dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64 Add pinctrl macros for AM64 SoC. These macro definitions are similar to that of previous platforms, but adding new definitions to avoid any naming confusions in the soc dts files. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> |
#
382f1dda |
|
12-Jun-2019 |
Lokesh Vutla <lokeshvutla@ti.com> |
dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E Add pinctrl macros for J721E SoC. These macro definitions are similar to that of AM6, but adding new definitions to avoid any naming confusions in the soc dts files. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> |
#
7202af92 |
|
28-Apr-2019 |
Andreas Dannenberg <dannenberg@ti.com> |
arm: dts: k3-am654: Sync IOPAD macros with Linux Transition to the IOPAD macros as used in Linux in which the pin mux mode is specified using a dedicated parameter while also dropping the related MUX_MODEx macros that are no longer needed. This transition will allow us to keep both Linux and U-Boot DTS in sync more easily. While at it also align the file name of the include file itself and update any references accordingly. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> |
#
8a6d2733 |
|
25-May-2022 |
Suman Anna <s-anna@ti.com> |
dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM62 Add pinctrl macros for AM62x SoCs. These macro definitions are similar to that of previous platforms, but adding new definitions to avoid any naming confusions in the SoC dts files. checkpatch insists the following error exists: ERROR: Macros with complex values should be enclosed in parentheses However, we do not need parentheses enclosing the values for this macro as we do intend it to generate two separate values as has been done for other similar platforms. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
#
55e1d747 |
|
25-Jan-2022 |
Aswath Govindraju <a-govindraju@ti.com> |
dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721S2 Add pinctrl macros for J721S2 SoC. These macro definitions are similar to that of J721E, but adding new definitions to avoid any naming confusions in the soc dts files. checkpatch insists the following error exists: ERROR: Macros with complex values should be enclosed in parentheses However, we do not need parentheses enclosing the values for this macro as we do intend it to generate two separate values as has been done for other similar platforms. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> |
#
4698bb8c |
|
31-Aug-2021 |
Nishanth Menon <nm@ti.com> |
dt-bindings: pinctrl: k3: Synchronize with v5.14 kernel Synchronize with the upstream version as of v5.14 kernel tag Signed-off-by: Nishanth Menon <nm@ti.com> |
#
dd418864 |
|
23-Apr-2021 |
Dave Gerlach <d-gerlach@ti.com> |
dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64 Add pinctrl macros for AM64 SoC. These macro definitions are similar to that of previous platforms, but adding new definitions to avoid any naming confusions in the soc dts files. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> |
#
382f1dda |
|
12-Jun-2019 |
Lokesh Vutla <lokeshvutla@ti.com> |
dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E Add pinctrl macros for J721E SoC. These macro definitions are similar to that of AM6, but adding new definitions to avoid any naming confusions in the soc dts files. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> |
#
7202af92 |
|
28-Apr-2019 |
Andreas Dannenberg <dannenberg@ti.com> |
arm: dts: k3-am654: Sync IOPAD macros with Linux Transition to the IOPAD macros as used in Linux in which the pin mux mode is specified using a dedicated parameter while also dropping the related MUX_MODEx macros that are no longer needed. This transition will allow us to keep both Linux and U-Boot DTS in sync more easily. While at it also align the file name of the include file itself and update any references accordingly. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> |
#
55e1d747 |
|
25-Jan-2022 |
Aswath Govindraju <a-govindraju@ti.com> |
dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721S2 Add pinctrl macros for J721S2 SoC. These macro definitions are similar to that of J721E, but adding new definitions to avoid any naming confusions in the soc dts files. checkpatch insists the following error exists: ERROR: Macros with complex values should be enclosed in parentheses However, we do not need parentheses enclosing the values for this macro as we do intend it to generate two separate values as has been done for other similar platforms. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> |
#
4698bb8c |
|
31-Aug-2021 |
Nishanth Menon <nm@ti.com> |
dt-bindings: pinctrl: k3: Synchronize with v5.14 kernel Synchronize with the upstream version as of v5.14 kernel tag Signed-off-by: Nishanth Menon <nm@ti.com> |
#
dd418864 |
|
23-Apr-2021 |
Dave Gerlach <d-gerlach@ti.com> |
dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64 Add pinctrl macros for AM64 SoC. These macro definitions are similar to that of previous platforms, but adding new definitions to avoid any naming confusions in the soc dts files. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> |
#
382f1dda |
|
12-Jun-2019 |
Lokesh Vutla <lokeshvutla@ti.com> |
dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E Add pinctrl macros for J721E SoC. These macro definitions are similar to that of AM6, but adding new definitions to avoid any naming confusions in the soc dts files. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> |
#
7202af92 |
|
28-Apr-2019 |
Andreas Dannenberg <dannenberg@ti.com> |
arm: dts: k3-am654: Sync IOPAD macros with Linux Transition to the IOPAD macros as used in Linux in which the pin mux mode is specified using a dedicated parameter while also dropping the related MUX_MODEx macros that are no longer needed. This transition will allow us to keep both Linux and U-Boot DTS in sync more easily. While at it also align the file name of the include file itself and update any references accordingly. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> |
#
4698bb8c |
|
31-Aug-2021 |
Nishanth Menon <nm@ti.com> |
dt-bindings: pinctrl: k3: Synchronize with v5.14 kernel Synchronize with the upstream version as of v5.14 kernel tag Signed-off-by: Nishanth Menon <nm@ti.com> |
#
dd418864 |
|
23-Apr-2021 |
Dave Gerlach <d-gerlach@ti.com> |
dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64 Add pinctrl macros for AM64 SoC. These macro definitions are similar to that of previous platforms, but adding new definitions to avoid any naming confusions in the soc dts files. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> |
#
382f1dda |
|
12-Jun-2019 |
Lokesh Vutla <lokeshvutla@ti.com> |
dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E Add pinctrl macros for J721E SoC. These macro definitions are similar to that of AM6, but adding new definitions to avoid any naming confusions in the soc dts files. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> |
#
7202af92 |
|
28-Apr-2019 |
Andreas Dannenberg <dannenberg@ti.com> |
arm: dts: k3-am654: Sync IOPAD macros with Linux Transition to the IOPAD macros as used in Linux in which the pin mux mode is specified using a dedicated parameter while also dropping the related MUX_MODEx macros that are no longer needed. This transition will allow us to keep both Linux and U-Boot DTS in sync more easily. While at it also align the file name of the include file itself and update any references accordingly. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> |
#
dd418864 |
|
23-Apr-2021 |
Dave Gerlach <d-gerlach@ti.com> |
dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64 Add pinctrl macros for AM64 SoC. These macro definitions are similar to that of previous platforms, but adding new definitions to avoid any naming confusions in the soc dts files. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> |
#
382f1dda |
|
12-Jun-2019 |
Lokesh Vutla <lokeshvutla@ti.com> |
dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E Add pinctrl macros for J721E SoC. These macro definitions are similar to that of AM6, but adding new definitions to avoid any naming confusions in the soc dts files. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> |
#
7202af92 |
|
28-Apr-2019 |
Andreas Dannenberg <dannenberg@ti.com> |
arm: dts: k3-am654: Sync IOPAD macros with Linux Transition to the IOPAD macros as used in Linux in which the pin mux mode is specified using a dedicated parameter while also dropping the related MUX_MODEx macros that are no longer needed. This transition will allow us to keep both Linux and U-Boot DTS in sync more easily. While at it also align the file name of the include file itself and update any references accordingly. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> |
#
382f1dda |
|
12-Jun-2019 |
Lokesh Vutla <lokeshvutla@ti.com> |
dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E Add pinctrl macros for J721E SoC. These macro definitions are similar to that of AM6, but adding new definitions to avoid any naming confusions in the soc dts files. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> |
#
7202af92 |
|
28-Apr-2019 |
Andreas Dannenberg <dannenberg@ti.com> |
arm: dts: k3-am654: Sync IOPAD macros with Linux Transition to the IOPAD macros as used in Linux in which the pin mux mode is specified using a dedicated parameter while also dropping the related MUX_MODEx macros that are no longer needed. This transition will allow us to keep both Linux and U-Boot DTS in sync more easily. While at it also align the file name of the include file itself and update any references accordingly. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> |