dt-bindings: mfd: stm32f7: Add binding definition for CAN3

commit 8f3ef556f8e1a670895f59ef3f01e4e26edd63e3 Linux upstream.

Add binding definition for CAN3 peripheral.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20230423172528.1398158-2-dario.binacchi@amarulasolutions.com
Signed-off-by: Lee Jones <lee@kernel.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

ARM: dts: stm32: DT alignment with kernel v5.4-rc4

Device tree and binding alignment with kernel v5.4-rc4

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>

clk: clk_stm32f: Add DSI clock support

DSI clock is available on STM32F769-disco and
STM32F469-disco board.

Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>

clk: clk_stm32fx: add clock configuration for mmc usage

MMC block needs 48Mhz source clock, for that we choose
to select the SAI PLL.
Update also stm32_clock_get_rate() to retrieve the MMC
clock source needed in MMC driver.

STM32F4 uses a different RCC variant than STM32F7. For STM32F4
sdmmc clocks bit are located into dckcfgr register whereas there
are located into dckcfgr2 registers on STM32F7.
In both registers, bits CK48MSEL and SDMMC1SEL are located at
the same position.

Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Vikas Manocha <vikas.manocha@st.com>

ARM: DTS: stm32: align DT clock declaration with kernel

Use the same clocks macro than the one used by kernel DT.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Vikas MANOCHA <vikas.manocha@st.com>

ARM: dts: stm32: DT alignment with kernel v5.4-rc4

Device tree and binding alignment with kernel v5.4-rc4

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>

clk: clk_stm32f: Add DSI clock support

DSI clock is available on STM32F769-disco and
STM32F469-disco board.

Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>

clk: clk_stm32fx: add clock configuration for mmc usage

MMC block needs 48Mhz source clock, for that we choose
to select the SAI PLL.
Update also stm32_clock_get_rate() to retrieve the MMC
clock source needed in MMC driver.

STM32F4 uses a different RCC variant than STM32F7. For STM32F4
sdmmc clocks bit are located into dckcfgr register whereas there
are located into dckcfgr2 registers on STM32F7.
In both registers, bits CK48MSEL and SDMMC1SEL are located at
the same position.

Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Vikas Manocha <vikas.manocha@st.com>

ARM: DTS: stm32: align DT clock declaration with kernel

Use the same clocks macro than the one used by kernel DT.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Vikas MANOCHA <vikas.manocha@st.com>

clk: clk_stm32f: Add DSI clock support

DSI clock is available on STM32F769-disco and
STM32F469-disco board.

Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>

clk: clk_stm32fx: add clock configuration for mmc usage

MMC block needs 48Mhz source clock, for that we choose
to select the SAI PLL.
Update also stm32_clock_get_rate() to retrieve the MMC
clock source needed in MMC driver.

STM32F4 uses a different RCC variant than STM32F7. For STM32F4
sdmmc clocks bit are located into dckcfgr register whereas there
are located into dckcfgr2 registers on STM32F7.
In both registers, bits CK48MSEL and SDMMC1SEL are located at
the same position.

Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Vikas Manocha <vikas.manocha@st.com>

ARM: DTS: stm32: align DT clock declaration with kernel

Use the same clocks macro than the one used by kernel DT.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Vikas MANOCHA <vikas.manocha@st.com>