#
8c103c33 |
|
13-Feb-2023 |
Simon Glass <sjg@chromium.org> |
dm: dts: Convert driver model tags to use new schema Now that Linux has accepted these tags, move the device tree files in U-Boot over to use them. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
7a4b6964 |
|
21-Apr-2020 |
Weijie Gao <weijie.gao@mediatek.com> |
mips: mtmips: add SPL support This patch adds SPL support for mtmips platform. The lowlevel architecture is split into SPL and the rest parts are built into a memory loadable u-boot image. Optional SPL_DM and OF_CONTROL are also supported. The increment of size is very small (< 10 KiB) if SPL_DM and OF_CONTROL are not enabled and the memory bootable u-boot (u-boot.img) is generated automatically so there is not need to add a separate config for it. A lzma compressed payload (u-boot-lzma.img) is also generated and it will be combined with u-boot-spl.bin to form the unified ROM bootable binary u-boot-mtmips.bin. A spl loader is added to support uncompress the payload. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
df3bad96 |
|
21-Apr-2020 |
Weijie Gao <weijie.gao@mediatek.com> |
dts: mtmips: add alternative pinmux node for uart2 This patch adds a new pinmux for UART2, which shares the pins with SPIS. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
c366a456 |
|
21-Apr-2020 |
Weijie Gao <weijie.gao@mediatek.com> |
mips: mtmips: make use of sysreset-resetctrl for mt7628 soc This patch replaces sysreset-syscon with sysreset-resetctrl for mt7628 soc. Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
e3b326fe |
|
25-Sep-2019 |
Weijie Gao <weijie.gao@mediatek.com> |
dts: mtmips: add mmc related nodes for mt7628an.dtsi This patch adds mmc related nodes for mt7628an.dtsi Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
cff0b044 |
|
25-Sep-2019 |
Weijie Gao <weijie.gao@mediatek.com> |
dts: mtmips: enable eth port0 led and link poll functions for all boards This patch adds default p0led status and phy0 link polling for all boards. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
6658ebc9 |
|
25-Sep-2019 |
Weijie Gao <weijie.gao@mediatek.com> |
dts: mtmips: update reset controller node for mt7628 This patch updates reset controller node for mt7628 Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
123ffd46 |
|
25-Sep-2019 |
Weijie Gao <weijie.gao@mediatek.com> |
dts: mtmips: add default pinctrl for uart nodes This patch adds default pinctrl for uart nodes Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
fdf92df2 |
|
25-Sep-2019 |
Weijie Gao <weijie.gao@mediatek.com> |
dts: mtmips: add pinctrl node for mt7628 This patch adds pinctrl node with default pin state for mt7628an.dtsi. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
2d767a74 |
|
25-Sep-2019 |
Weijie Gao <weijie.gao@mediatek.com> |
dts: mtmips: add clock node for mt7628 This patch adds clkctrl node for mt7628 and adds clocks property for some node. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
5fcea8d3 |
|
25-Sep-2019 |
Weijie Gao <weijie.gao@mediatek.com> |
dts: mtmips: enable high-speed UART support for mt7628 All three UARTs of mt7628 are actually MediaTek's high-speed UARTs which support baudrate up to 921600. The high-speed UART is compatible with ns16550 when baudrate <= 115200. Add compatible string to dtsi file so u-boot can use it when serial_mtk driver is built in. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
d1d88144 |
|
25-Sep-2019 |
Weijie Gao <weijie.gao@mediatek.com> |
dts: mtmips: move uart property clock-frequency into mt7628an.dtsi The UART of MT7628 has fixed 40MHz input clock so there is no need to put clock-frequency in every dts files. Just put it into the common dtsi file. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
b7461e01 |
|
28-Nov-2018 |
Stefan Roese <sr@denx.de> |
mips: mt7628: Change compatible property of the ethernet DT node As the driver has been changed to be more specific, the DT compatible property also needs to be adapted. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> |
#
9a89b2b9 |
|
09-Oct-2018 |
Stefan Roese <sr@denx.de> |
mips: mt76xx: Add watchdog DT node to mt7628a.dtsi Add the watchdog DT node to the DTS file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> |
#
60f6be12 |
|
09-Oct-2018 |
Stefan Roese <sr@denx.de> |
mips: mt76xx: Add GPIO DT nodes to mt7628a.dtsi Add the GPIO DT nodes to the DTS file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> |
#
82dbe648 |
|
09-Oct-2018 |
Stefan Roese <sr@denx.de> |
mips: mt76xx: Add ethernet DT node to mt7628a.dtsi Add the ethernet DT node to the DTS file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> |
#
fdd1a9ff |
|
16-Aug-2018 |
Stefan Roese <sr@denx.de> |
mips: mt7628a.dtsi: Add SPI clock-frequency property This patch adds the clock-frequency property to the SPI controller DT node. It will be used by the SPI driver to calculate the baud rate. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> |
#
41f6e6eb |
|
16-Aug-2018 |
Stefan Roese <sr@denx.de> |
mips: mt76xx: Add sysreset support This patch adds the necessary sysreset DT node and enables the required drivers via Kconfig. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> |
#
4c835a60 |
|
05-Sep-2018 |
Stefan Roese <sr@denx.de> |
mips: Add basic MediaTek MT7620/88 support This patch adds basic support for the MediaTek MT7620/88 SoCs. Parts of the code is copied from the MediaTek GitHub repository: https://github.com/MediaTek-Labs/linkit-smart-uboot.git The mt7628a.dtsi file is imported from Linux v4.17. Support for the LinkIt Smart 7688 module and the Gardena Smart Gateway both based on the MT7688 will be added in further patches. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> |
#
7a4b6964 |
|
21-Apr-2020 |
Weijie Gao <weijie.gao@mediatek.com> |
mips: mtmips: add SPL support This patch adds SPL support for mtmips platform. The lowlevel architecture is split into SPL and the rest parts are built into a memory loadable u-boot image. Optional SPL_DM and OF_CONTROL are also supported. The increment of size is very small (< 10 KiB) if SPL_DM and OF_CONTROL are not enabled and the memory bootable u-boot (u-boot.img) is generated automatically so there is not need to add a separate config for it. A lzma compressed payload (u-boot-lzma.img) is also generated and it will be combined with u-boot-spl.bin to form the unified ROM bootable binary u-boot-mtmips.bin. A spl loader is added to support uncompress the payload. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
df3bad96 |
|
21-Apr-2020 |
Weijie Gao <weijie.gao@mediatek.com> |
dts: mtmips: add alternative pinmux node for uart2 This patch adds a new pinmux for UART2, which shares the pins with SPIS. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
c366a456 |
|
21-Apr-2020 |
Weijie Gao <weijie.gao@mediatek.com> |
mips: mtmips: make use of sysreset-resetctrl for mt7628 soc This patch replaces sysreset-syscon with sysreset-resetctrl for mt7628 soc. Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
e3b326fe |
|
25-Sep-2019 |
Weijie Gao <weijie.gao@mediatek.com> |
dts: mtmips: add mmc related nodes for mt7628an.dtsi This patch adds mmc related nodes for mt7628an.dtsi Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
cff0b044 |
|
25-Sep-2019 |
Weijie Gao <weijie.gao@mediatek.com> |
dts: mtmips: enable eth port0 led and link poll functions for all boards This patch adds default p0led status and phy0 link polling for all boards. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
6658ebc9 |
|
25-Sep-2019 |
Weijie Gao <weijie.gao@mediatek.com> |
dts: mtmips: update reset controller node for mt7628 This patch updates reset controller node for mt7628 Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
123ffd46 |
|
25-Sep-2019 |
Weijie Gao <weijie.gao@mediatek.com> |
dts: mtmips: add default pinctrl for uart nodes This patch adds default pinctrl for uart nodes Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
fdf92df2 |
|
25-Sep-2019 |
Weijie Gao <weijie.gao@mediatek.com> |
dts: mtmips: add pinctrl node for mt7628 This patch adds pinctrl node with default pin state for mt7628an.dtsi. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
2d767a74 |
|
25-Sep-2019 |
Weijie Gao <weijie.gao@mediatek.com> |
dts: mtmips: add clock node for mt7628 This patch adds clkctrl node for mt7628 and adds clocks property for some node. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
5fcea8d3 |
|
25-Sep-2019 |
Weijie Gao <weijie.gao@mediatek.com> |
dts: mtmips: enable high-speed UART support for mt7628 All three UARTs of mt7628 are actually MediaTek's high-speed UARTs which support baudrate up to 921600. The high-speed UART is compatible with ns16550 when baudrate <= 115200. Add compatible string to dtsi file so u-boot can use it when serial_mtk driver is built in. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
d1d88144 |
|
25-Sep-2019 |
Weijie Gao <weijie.gao@mediatek.com> |
dts: mtmips: move uart property clock-frequency into mt7628an.dtsi The UART of MT7628 has fixed 40MHz input clock so there is no need to put clock-frequency in every dts files. Just put it into the common dtsi file. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
b7461e01 |
|
28-Nov-2018 |
Stefan Roese <sr@denx.de> |
mips: mt7628: Change compatible property of the ethernet DT node As the driver has been changed to be more specific, the DT compatible property also needs to be adapted. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> |
#
9a89b2b9 |
|
09-Oct-2018 |
Stefan Roese <sr@denx.de> |
mips: mt76xx: Add watchdog DT node to mt7628a.dtsi Add the watchdog DT node to the DTS file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> |
#
60f6be12 |
|
09-Oct-2018 |
Stefan Roese <sr@denx.de> |
mips: mt76xx: Add GPIO DT nodes to mt7628a.dtsi Add the GPIO DT nodes to the DTS file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> |
#
82dbe648 |
|
09-Oct-2018 |
Stefan Roese <sr@denx.de> |
mips: mt76xx: Add ethernet DT node to mt7628a.dtsi Add the ethernet DT node to the DTS file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> |
#
fdd1a9ff |
|
16-Aug-2018 |
Stefan Roese <sr@denx.de> |
mips: mt7628a.dtsi: Add SPI clock-frequency property This patch adds the clock-frequency property to the SPI controller DT node. It will be used by the SPI driver to calculate the baud rate. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> |
#
41f6e6eb |
|
16-Aug-2018 |
Stefan Roese <sr@denx.de> |
mips: mt76xx: Add sysreset support This patch adds the necessary sysreset DT node and enables the required drivers via Kconfig. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> |
#
4c835a60 |
|
05-Sep-2018 |
Stefan Roese <sr@denx.de> |
mips: Add basic MediaTek MT7620/88 support This patch adds basic support for the MediaTek MT7620/88 SoCs. Parts of the code is copied from the MediaTek GitHub repository: https://github.com/MediaTek-Labs/linkit-smart-uboot.git The mt7628a.dtsi file is imported from Linux v4.17. Support for the LinkIt Smart 7688 module and the Gardena Smart Gateway both based on the MT7688 will be added in further patches. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> |
#
e3b326fe |
|
25-Sep-2019 |
Weijie Gao <weijie.gao@mediatek.com> |
dts: mtmips: add mmc related nodes for mt7628an.dtsi This patch adds mmc related nodes for mt7628an.dtsi Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
cff0b044 |
|
25-Sep-2019 |
Weijie Gao <weijie.gao@mediatek.com> |
dts: mtmips: enable eth port0 led and link poll functions for all boards This patch adds default p0led status and phy0 link polling for all boards. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
6658ebc9 |
|
25-Sep-2019 |
Weijie Gao <weijie.gao@mediatek.com> |
dts: mtmips: update reset controller node for mt7628 This patch updates reset controller node for mt7628 Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
123ffd46 |
|
25-Sep-2019 |
Weijie Gao <weijie.gao@mediatek.com> |
dts: mtmips: add default pinctrl for uart nodes This patch adds default pinctrl for uart nodes Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
fdf92df2 |
|
25-Sep-2019 |
Weijie Gao <weijie.gao@mediatek.com> |
dts: mtmips: add pinctrl node for mt7628 This patch adds pinctrl node with default pin state for mt7628an.dtsi. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
2d767a74 |
|
25-Sep-2019 |
Weijie Gao <weijie.gao@mediatek.com> |
dts: mtmips: add clock node for mt7628 This patch adds clkctrl node for mt7628 and adds clocks property for some node. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
5fcea8d3 |
|
25-Sep-2019 |
Weijie Gao <weijie.gao@mediatek.com> |
dts: mtmips: enable high-speed UART support for mt7628 All three UARTs of mt7628 are actually MediaTek's high-speed UARTs which support baudrate up to 921600. The high-speed UART is compatible with ns16550 when baudrate <= 115200. Add compatible string to dtsi file so u-boot can use it when serial_mtk driver is built in. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
d1d88144 |
|
25-Sep-2019 |
Weijie Gao <weijie.gao@mediatek.com> |
dts: mtmips: move uart property clock-frequency into mt7628an.dtsi The UART of MT7628 has fixed 40MHz input clock so there is no need to put clock-frequency in every dts files. Just put it into the common dtsi file. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> |
#
b7461e01 |
|
28-Nov-2018 |
Stefan Roese <sr@denx.de> |
mips: mt7628: Change compatible property of the ethernet DT node As the driver has been changed to be more specific, the DT compatible property also needs to be adapted. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> |
#
9a89b2b9 |
|
09-Oct-2018 |
Stefan Roese <sr@denx.de> |
mips: mt76xx: Add watchdog DT node to mt7628a.dtsi Add the watchdog DT node to the DTS file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> |
#
60f6be12 |
|
09-Oct-2018 |
Stefan Roese <sr@denx.de> |
mips: mt76xx: Add GPIO DT nodes to mt7628a.dtsi Add the GPIO DT nodes to the DTS file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> |
#
82dbe648 |
|
09-Oct-2018 |
Stefan Roese <sr@denx.de> |
mips: mt76xx: Add ethernet DT node to mt7628a.dtsi Add the ethernet DT node to the DTS file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> |
#
fdd1a9ff |
|
16-Aug-2018 |
Stefan Roese <sr@denx.de> |
mips: mt7628a.dtsi: Add SPI clock-frequency property This patch adds the clock-frequency property to the SPI controller DT node. It will be used by the SPI driver to calculate the baud rate. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> |
#
41f6e6eb |
|
16-Aug-2018 |
Stefan Roese <sr@denx.de> |
mips: mt76xx: Add sysreset support This patch adds the necessary sysreset DT node and enables the required drivers via Kconfig. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> |
#
4c835a60 |
|
05-Sep-2018 |
Stefan Roese <sr@denx.de> |
mips: Add basic MediaTek MT7620/88 support This patch adds basic support for the MediaTek MT7620/88 SoCs. Parts of the code is copied from the MediaTek GitHub repository: https://github.com/MediaTek-Labs/linkit-smart-uboot.git The mt7628a.dtsi file is imported from Linux v4.17. Support for the LinkIt Smart 7688 module and the Gardena Smart Gateway both based on the MT7688 will be added in further patches. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> |
#
b7461e01 |
|
28-Nov-2018 |
Stefan Roese <sr@denx.de> |
mips: mt7628: Change compatible property of the ethernet DT node As the driver has been changed to be more specific, the DT compatible property also needs to be adapted. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> |
#
9a89b2b9 |
|
09-Oct-2018 |
Stefan Roese <sr@denx.de> |
mips: mt76xx: Add watchdog DT node to mt7628a.dtsi Add the watchdog DT node to the DTS file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> |
#
60f6be12 |
|
09-Oct-2018 |
Stefan Roese <sr@denx.de> |
mips: mt76xx: Add GPIO DT nodes to mt7628a.dtsi Add the GPIO DT nodes to the DTS file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> |
#
82dbe648 |
|
09-Oct-2018 |
Stefan Roese <sr@denx.de> |
mips: mt76xx: Add ethernet DT node to mt7628a.dtsi Add the ethernet DT node to the DTS file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> |
#
fdd1a9ff |
|
16-Aug-2018 |
Stefan Roese <sr@denx.de> |
mips: mt7628a.dtsi: Add SPI clock-frequency property This patch adds the clock-frequency property to the SPI controller DT node. It will be used by the SPI driver to calculate the baud rate. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> |
#
41f6e6eb |
|
16-Aug-2018 |
Stefan Roese <sr@denx.de> |
mips: mt76xx: Add sysreset support This patch adds the necessary sysreset DT node and enables the required drivers via Kconfig. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> |
#
4c835a60 |
|
05-Sep-2018 |
Stefan Roese <sr@denx.de> |
mips: Add basic MediaTek MT7620/88 support This patch adds basic support for the MediaTek MT7620/88 SoCs. Parts of the code is copied from the MediaTek GitHub repository: https://github.com/MediaTek-Labs/linkit-smart-uboot.git The mt7628a.dtsi file is imported from Linux v4.17. Support for the LinkIt Smart 7688 module and the Gardena Smart Gateway both based on the MT7688 will be added in further patches. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> |
#
9a89b2b9 |
|
09-Oct-2018 |
Stefan Roese <sr@denx.de> |
mips: mt76xx: Add watchdog DT node to mt7628a.dtsi Add the watchdog DT node to the DTS file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
|
#
60f6be12 |
|
09-Oct-2018 |
Stefan Roese <sr@denx.de> |
mips: mt76xx: Add GPIO DT nodes to mt7628a.dtsi Add the GPIO DT nodes to the DTS file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
|
#
82dbe648 |
|
09-Oct-2018 |
Stefan Roese <sr@denx.de> |
mips: mt76xx: Add ethernet DT node to mt7628a.dtsi Add the ethernet DT node to the DTS file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
|
#
fdd1a9ff |
|
16-Aug-2018 |
Stefan Roese <sr@denx.de> |
mips: mt7628a.dtsi: Add SPI clock-frequency property This patch adds the clock-frequency property to the SPI controller DT node. It will be used by the SPI driver to calculate the baud rate. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
|
#
41f6e6eb |
|
16-Aug-2018 |
Stefan Roese <sr@denx.de> |
mips: mt76xx: Add sysreset support This patch adds the necessary sysreset DT node and enables the required drivers via Kconfig. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
|
#
4c835a60 |
|
05-Sep-2018 |
Stefan Roese <sr@denx.de> |
mips: Add basic MediaTek MT7620/88 support This patch adds basic support for the MediaTek MT7620/88 SoCs. Parts of the code is copied from the MediaTek GitHub repository: https://github.com/MediaTek-Labs/linkit-smart-uboot.git The mt7628a.dtsi file is imported from Linux v4.17. Support for the LinkIt Smart 7688 module and the Gardena Smart Gateway both based on the MT7688 will be added in further patches. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
|