#
e97aeda6 |
|
03-Sep-2023 |
Dario Binacchi <dario.binacchi@amarulasolutions.com> |
dt-bindings: mfd: stm32f7: Add binding definition for CAN3 commit 8f3ef556f8e1a670895f59ef3f01e4e26edd63e3 Linux upstream. Add binding definition for CAN3 peripheral. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20230423172528.1398158-2-dario.binacchi@amarulasolutions.com Signed-off-by: Lee Jones <lee@kernel.org> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> |
#
62d620c2 |
|
06-Nov-2019 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
ARM: dts: stm32: DT alignment with kernel v5.4-rc4 Device tree and binding alignment with kernel v5.4-rc4 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> |
#
6243c884 |
|
08-Feb-2018 |
Patrice Chotard <patrice.chotard@foss.st.com> |
clk: clk_stm32f: Add DSI clock support DSI clock is available on STM32F769-disco and STM32F469-disco board. Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> |
#
4e97e257 |
|
15-Nov-2017 |
Patrice Chotard <patrice.chotard@foss.st.com> |
clk: clk_stm32fx: add clock configuration for mmc usage MMC block needs 48Mhz source clock, for that we choose to select the SAI PLL. Update also stm32_clock_get_rate() to retrieve the MMC clock source needed in MMC driver. STM32F4 uses a different RCC variant than STM32F7. For STM32F4 sdmmc clocks bit are located into dckcfgr register whereas there are located into dckcfgr2 registers on STM32F7. In both registers, bits CK48MSEL and SDMMC1SEL are located at the same position. Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com> |
#
fa87abb6 |
|
18-Jul-2017 |
Patrice Chotard <patrice.chotard@foss.st.com> |
ARM: DTS: stm32: align DT clock declaration with kernel Use the same clocks macro than the one used by kernel DT. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Vikas MANOCHA <vikas.manocha@st.com> |
#
62d620c2 |
|
06-Nov-2019 |
Patrick Delaunay <patrick.delaunay@st.com> |
ARM: dts: stm32: DT alignment with kernel v5.4-rc4 Device tree and binding alignment with kernel v5.4-rc4 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> |
#
6243c884 |
|
08-Feb-2018 |
Patrice Chotard <patrice.chotard@st.com> |
clk: clk_stm32f: Add DSI clock support DSI clock is available on STM32F769-disco and STM32F469-disco board. Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> |
#
4e97e257 |
|
15-Nov-2017 |
Patrice Chotard <patrice.chotard@st.com> |
clk: clk_stm32fx: add clock configuration for mmc usage MMC block needs 48Mhz source clock, for that we choose to select the SAI PLL. Update also stm32_clock_get_rate() to retrieve the MMC clock source needed in MMC driver. STM32F4 uses a different RCC variant than STM32F7. For STM32F4 sdmmc clocks bit are located into dckcfgr register whereas there are located into dckcfgr2 registers on STM32F7. In both registers, bits CK48MSEL and SDMMC1SEL are located at the same position. Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com> |
#
fa87abb6 |
|
18-Jul-2017 |
Patrice Chotard <patrice.chotard@st.com> |
ARM: DTS: stm32: align DT clock declaration with kernel Use the same clocks macro than the one used by kernel DT. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Vikas MANOCHA <vikas.manocha@st.com> |
#
6243c884 |
|
08-Feb-2018 |
Patrice Chotard <patrice.chotard@st.com> |
clk: clk_stm32f: Add DSI clock support DSI clock is available on STM32F769-disco and STM32F469-disco board. Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
|
#
4e97e257 |
|
15-Nov-2017 |
Patrice Chotard <patrice.chotard@st.com> |
clk: clk_stm32fx: add clock configuration for mmc usage MMC block needs 48Mhz source clock, for that we choose to select the SAI PLL. Update also stm32_clock_get_rate() to retrieve the MMC clock source needed in MMC driver. STM32F4 uses a different RCC variant than STM32F7. For STM32F4 sdmmc clocks bit are located into dckcfgr register whereas there are located into dckcfgr2 registers on STM32F7. In both registers, bits CK48MSEL and SDMMC1SEL are located at the same position. Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
|
#
fa87abb6 |
|
18-Jul-2017 |
Patrice Chotard <patrice.chotard@st.com> |
ARM: DTS: stm32: align DT clock declaration with kernel Use the same clocks macro than the one used by kernel DT. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Vikas MANOCHA <vikas.manocha@st.com>
|